bulk feed tank

BULK FEED TANK

Cumberland is a division of The GSI Group, Inc., the world’s largest manufacturer of corrugated, galvanized steel storage tanks. Therefore, you can be assured every component is made from the finest raw materials available and is manufactured by skilled professionals who have years of experience. Whatever the project, Cumberland has variety of bin sizes to fit your specific needs.

————————————————————————————————————————————————————

FEATURES

BIN ROOF

Cumberland offers your choice of a 30° or 40° bin roof to adapt to any application. Roof panels are precision manufactured using die-form tooling to provide consistent quality. Both 30° and 40° roofs feature reinforcing ribs at each roof seam for added strength and rigidity.

SURE-FLOW

Sure-Flo directs feed down the hopper of the bin rather than down the center creating a first in, first out feed flow.

Reduces Feed Bridging.
First Feed In is First Feed Out.
Reduces Feed Separation.
Easy to Install.

SECURE ACCESS Cumberland feed tanks feature the exclusive, patented "Auto-Lok" ground control access system for opening, closing, and latching the fill cap safely and easily from the ground. Our cap system comes completely factory assembled. The cap itself swings open a full 180°. The cap lies flat, parallel to the ground, completely eliminating interference with, or damage to, the cap from the fill auger.		ONE-OF-A-KIND DRIP LIP Cumberland’s new drip lip water deflection system is a one-of-a-kind, roll-formed bottom sheet edge, which forces water away from the hopper and lower boot area. Complete weather protection without a loss in capacity.
———————————————————————————————————————————————————
UNLOADERS Designed to fit below the 16" (406mm) plastic and 22” (559 mm) metal boots, Cumberland's standard unloaders are available for 2.2" (55mm), 3" (75mm), 3.5" (90mm), and 5" (125mm). All Cumberland unloaders have an ultra high impact, polypropylene slide-gate above the auger to meter feed or serve as a complete shut off. Also, a convenient inspection/clean out plate, located on the side, is easily removed with two wing nuts. Unloader shown with optional swing away bottom for 100% cleanout.

FLEX-FLO™ MODELS Cumberland offers five Flex-Flo models with capacities ranging from 15 lbs. to 220 lbs./minute (6.8kg to 99.8kg/min.). Whether it’s ground feed, crumble feed, mash, high moisture corn, shelled corn or pellets, Cumberland has the equipment to handle it. For corn with up to 27% moisture and other hard to flow materials, Cumberland also offers a Flex-Flo™ High Roughage system which incorporates a special combination of a 3” (75mm) auger in a 3-1/2” (90mm) tube to reduce plugging.

HEAVY DUTY BOOTS Cumberland’s 16” (40.6cm) parabolic boot (available in straight boot, 30° boot, and straight twin boot) is made from the very latest in ultra high impact polypropylene for greater flexibility, dependability and durability.		CLEAR BOOTS Cumberland's clear boot allows producers to verify at a glance while driving by that feed is present in the bin. This heavy walled boot is injected molded from a specially for-mulated ultraviolet stabilized clear polycar-bonate blend to provide years of trouble free service.

————————————————————————————————————————————————————