Protect the health of your investment with a properly controlled curtain system. Wide changes in the environment just don’t fly with today’s modern genetics. The combination of several different types of dependable drive units and a wide variety of versatile environmental controls, give you the edge to achieve excellent herd health.
CURTAIN CONTROLLER
The newly designed Curtain Controller is a screw driven automated curtain machine with a heavy duty 15, 30 or 60 RPM, 115 VAC motor. Multi-directional, frame mounted, header pulleys and latch out assembly is standard on all machines. Thermostat controls, electronic controls and extra bracket kits are sold separately.
Optional shaft mounted potentiometer provides an accurate and immediate signal to indicate movement and position of the drive. The potentiometer can be wired to an Expert Ventilation Control to allow precise control of air inlets or curtains based on temperature rather than static pressure.
Polyethylene pulley covers help stop the elements from entering through the area around the pulleys.
The Curtain Controller drive block assembly features a nylon insert in a heavy-duty powder coated weldment. The removable nylon insert simplifies maintenance, decreases friction and provides wear characteristics superior to conventional brass drive blocks. UHMW polyethylene guide wheels insure smooth travel, proper alignment and stability of the drive block in the machine.
Isolated primary and secondary limit switches allow for back-up protection. New one-piece, galvanized, lift-off cover makes for ease of service. Plastic water resistant junction box is accessible from the outside of the curtain controller.
Adjustable latch out switches can be installed in multiple locations to energize and de-energize a variety of equipment.
The 511 series is designed to be used with the latest in electronic controls. The internal timer has been removed allowing the newer electronic controls to fully utilize their electronic timers.
The 511 series comes in two models; the 511 is the standard drum unit, while the 511S incorporates a sprocket drive configuration. Both of these machines employ the Auto Curtain’s standard of excellence, durability and performance.
AUTO CURTAIN 506
Operates curtains on a cable system by winching cable around a grooved drum controlled by a thermostat and timer.
506S
The model 506S version uses a sprocket and chain drive (instead of drum) turning a pipe that runs the length of the building pulling the curtain or door drop cords directly around the pipe eliminating the need for cable (operates same as 506).
SP-2CONTROL
The SP-2 reads the static pressure in the room and adjusts any three wire drive unit until it reaches your preset requirement. With an adjustable time delay, manual adjustment and a high and low pressure alarm, this static pressure control is as complete as they get.
HARDWARE KITS
Heavy-duty galvanized steel construction features sealed needle bearing pulleys, anti-wrap design and plated fasteners for ease of installation.
